Specific Safety Rules; Safety Alert Symbol - Black & Decker BDCSMCA Instruction Manual

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL:

May be used in conjunction with other symbols or pictographs.
DANGER:
Indicates hazardous situation which, if not avoided, will result in death or serious injury.
WARNING:
serious injury.
CAUTION:
Indicates a haz ard ous situation which, if not avoided, could result in minor or
mod er ate injury or property damage.
WARNING:
Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
WARNING:
Read all safety warn-
ings and all instructions provided
with your screwdriver (BDCS20,
BDCS30, BDCS40) before using this
attachment. Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious injury.

SpECIFIC SAFETY RULES

• Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
• Keep hands away from cutting area.
Never reach underneath the material for any
reason. Do not insert fingers or thumb into
the vicinity of the blades.
• Stay clear of end pieces that may fall
after being cut off. Contact with a sharp
edge could result in personal injury.
• STORE IDLE TOOL INDOORS. When not
in use, store cutter attachment indoors in
a dry and high or locked-up place – out of
reach of children.
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
WARNING:
ALWAYS use safety
glasses. Everyday eyeglasses are NOT safety
Indicates hazardous situation which, if not avoided, could result in death or
DANGER, WARNING, OR CAUTION.
Indicates
glasses. Also use face or dust mask if drilling
operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA
Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
WARNING:
power sanding, sawing, grinding, drilling,
and other construction activities contains
chemicals known to the state of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from
power sanding, sawing, grinding, drilling,
and other construction activities. Wear
protective clothing and wash exposed
areas with soap and water. Allowing dust to
get into your mouth, eyes, or lay on the skin
may promote absorption of harmful chemicals.
WARNING:
generate and/or disperse dust, which may
cause serious and permanent respiratory or
other injury. Always use NOSH/OSHA
approved respiratory protection appropriate for
the dust exposure. Direct particles away from
face and body.
2
Some dust created by
Use of this tool can