Initialization By Init Key Operation (Ema Card) - NEC Univerge SV8500 Operation And Maintenance Manual

3.4 Initialization by INIT key Operation (EMA card)

The following initialization type is available.
• Non Load Initial
All on-going calls will be disconnected. The system will be rebooted by using program and office data that
are in the MEM.
STEP 1 Identify which system of CPU is in operation. The following shows an example when the system
is operating by CPU #0.
Lamp Layout on EMA Card (when CPU #0 is active)
SYS
LINK
PWR
ALM
SYS 1
SYS 0
STEP 2 Press "INIT" key on the EMA card to start Non Load Initial.
SYS
LINK ACT
PWR
ALM
SYS 1
SYS 0
STEP 3 Check the lamp indications on the EMA card.
STEP 4 Set the current date and time from the PCPro. (Refer to
STEP 5 Release the indicated alarm. (Refer to
[MEM]
- Program
- Office Data
SYS
MB SYS
ACT ALM
(SUB) LOCK SEL
PFT
ON 1
1 2 1 2
0
SW00
SW01
MB SYS SYS
ALM
SEL
(SUB) PFT LOCK
ON
1
1 2 1 2 0
SW00
SW01
Lamp (Color)
PWR (Green)
LINK (Green)
ACT (Green)
SYS ALM (Red)
CHAPTER 2
Initialization
PBI No.
INIT
PBI No.
INIT
INIT key
Status
On
On
On
On
How to Adjust Date and
How to Stop Alarm
– 51 –
Operations of SV8500 Server
Lamp (Color)
PWR (Green)
SYS ALM (Red)
LINK (Green)
ACT (Green)
ALM (Red)
Time.)
Indications.)
Status
On
Off
On
On
Off