Table of Contents
Advertisement
I
V
-
1
-
7
M
I
V
-
1
-
7
M
This page allows you to manage the settings for Internet/LAN Access Control, Access List from
Internet, Management Port Setup, TLS/SSL Encryption Setup, CVM Access Control and Device
Management.
The management pages for IPv4 and IPv6 protocols are different.
Available settings are explained as follows:
Item
Router Name
Management Access
Control
Access List
Management Port Setup
DSL Status
After finished the above settings, click OK to save the configuration.
Vigor122 User's Guide
a
n
a
g
e
m
e
n
t
a
n
a
g
e
m
e
n
t
Description
Type in the modem name provided by ISP.
Allow management from the Internet - Enable the checkbox
to allow system administrators to login from the Internet.
There are several servers provided by the system to allow
you managing the modem from Internet. Check the box(es)
to specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
User Define Ports - Check to specify user-defined port
numbers for the Telnet, HTTP, HTTPS, and FTP ervers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
Broadcast to LAN – Check this box to send DSL status of
Vigor122 to the device in LAN. If LAN device connecting to
Vigor router/modem (e.g., Vigor2860, Vigor2925) supporting
to display DSL information, such information can be viewed
from the web page of that Vigor router/modem.
71
Advertisement
Table of Contents
