Honeywell Domonial cmi Quick Install Manual page 6

English
2.2 Cabling
Use the base to mark the holes for mounting (but do not use it as a drilling template).
The cover must remain open for programming.
-
J1
L1
>>
L2 PNV
<<
P1
P2
J2
Push here while lifting cover
6
+
+ -
SELV
J6 J7
J10
J8
J9
J4
LEDs
J11
AP
Take the cover off the unit by pushing in the locking clip
with a screwdriver and simultaneously lifting the cover.
Insert the battery into the space reserved for this and secure it
with the velcro strap.
Install a GSM or Ethernet card, if this is required.
Inside the control panel
J3
Mounting