Debugging Tools (Hardware); When Using In-Circuit Emulator Ie-78K0S-Ns Or Ie-78K0S-Ns-A; When Using In-Circuit Emulator Qb-78K0Skx1Mini - NEC 78K0S/KA1+ User Manual

A.5 Debugging Tools (Hardware)
A.5.1 When using in-circuit emulator IE-78K0S-NS or IE-78K0S-NS-A
IE-78K0S-NS
In-circuit emulator
IE-78K0S-NS-A
In-circuit emulator
IE-70000-MC-PS-B
AC adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
IE-789234-NS-EM1
Emulation board
NP-30MC
Emulation probe
NSPACK20BK
YSPACK30BK
Conversion connector
Specifications of pin header on
target system
Remarks 1. NP-30MC is a product of Naito Densei Machida Mfg. Co., Ltd.
For further information, contact: Naito Densei Machida Mfg. Co., Ltd. (TEL +81-45-475-4191)
2. NSPACK20BK and YSPACK30BK are products of TOKYO ELETECH CORPORATION.
For further information, contact Daimaru Kogyo Co., Ltd.
Tokyo Electronics Department (TEL: +81-3-3820-7112)
Osaka Electronics Department (TEL: +81-6-6244-6672)
A.5.2 When using in-circuit emulator QB-78K0SKX1MINI
QB-78K0SKX1MINI
In-circuit emulator
Specifications of pin header on
target system
APPENDIX A DEVELOPMENT TOOLS
In-circuit emulator for debugging hardware and software of application system using 78K/0S
Series. Supports integrated debugger (ID78K0S-NS). Used in combination with AC adapter,
emulation probe, and interface adapter for connecting the host machine.
This in-circuit emulator has a coverage function in addition to the functions of the IE-78K0S-
NS, and enhanced debugging functions such as an enhanced tracer function and timer
function.
Adapter for supplying power from 100 to 240 VAC outlet.
PC card and interface cable required when using a notebook type PC as the host machine
(PCMCIA socket supported).
Adapter required when using IBM PC/AT and compatibles as the host machine (ISA bus
supported).
Adapter required when using a personal computer incorporating the PCI bus is used as the
host machine.
Emulation board for emulating the peripheral hardware inherent to the device.
Used in combination with in-circuit emulator. A target cable is provided.
This probe is used to connect the in-circuit emulator to the target system and is designed for
use with a 30-pin plastic SSOP (MC-5A4 type).
This conversion connector connects the NP-30MC to a target system board designed to mount
a 20-pin plastic SSOP (MC-5A4 type).
• NSPACK20BK: Connector for connecting target
• YSPACK30BK: Connector for connecting emulator
0.635 mm × 0.635 mm (height: 6 mm)
In-circuit emulator for debugging hardware and software of application system using
78K0S/Kx1+ Series. Supports integrated debugger (ID78K0S-QB). Used in combination with
AC adapter, target cable, and USB interface cable for connecting the host machine.
0.635 mm × 0.635 mm (height: 6 mm)
User's Manual U16898EJ3V0UD
379