NETGEAR FVS124G Configuration Manual page 21

Hide thumbs Also See for FVS124G:

Table of Contents

Enable Mode Conﬁg in VPN Tracker

Advanced Users

It is very important to initially set up Mode Conﬁg as "automatic" instead of "active" or "passive". While this

may mean a short delay when connecting (if the device actually requires "active" mode conﬁg), it will

ensure that it works in both cases. You can later try passive or active to see which mode your device and

particular ﬁrmware revision actually uses

‣ Check "Mode Conﬁg" in the "Network Conﬁguration"

section. If you cannot ﬁnd this setting for your device,

make sure you have selected the correct device and

ﬁrmware revision

Table of Contents