Technical Specifications - HP HPE XP P9500 Manual

5 Technical Specifications

This chapter describes the physical, electrical, and operating specifications of an P9500 disk
array.
Mechanical specifications
The following table lists the mechanical specifications of the P9500 disk array.
Table 26 P9500 mechanical specifications
Dimension
Width (inches / mm)
Depth (inches / mm)
Height (inches / mm)
System Min (lbs / kg)
Weight
Max (lbs / kg)
Rack (lbs / kg)
Weight
Electrical specifications
The P9500 supports single-phase and three-phase power. Power consumption and heat
dissipation is independent of input power.
"System heat and power specifications" (page 55)
"System components heat and power specifications " (page 56)
specifications.
"AC power - PDU options" (page 57)
phase power.
System heat and power specifications
Table 27 System heat and power specifications
Heat Dissipation
and Power
Consumption
Specifications
(Maximum
configuration)
1
Heat (KW, BTU, Kcal) and Power (kVA) values are for determining load for site planning. Actual heat generation
and power demand may be less.
2
Calculated values with drives at a typical I/O condition. (Random Read and Write, 50 IOPSs for HDD, 2500 IOPSs
for SSD, Data Length: 8Kbytes). These values may increase for future compatible drives.
50 Technical Specifications
Single Rack
24.0 / 610
45 / 1145
79 / 2006
1120 / 508 (Diskless)
1558 / 707
292.6 / 133
lists the PDU specifications for both single phase and three
1, 2
Parameter
DKC Module-0
Max Power 5.87
consumption
(kVA)
Max Heat 5.57
dissipation (kW)
Max BTUs per 19012
hour
Max Kcal per hour 4791
Single Module
(3 racks)
71.3 / 1810
45 / 1145
79 / 2006
3750 / 1701
4319 / 1959
Rack Weight is included in system weight
lists system heat and power specifications.
lists component heat and power
DKC Module-1 DKU Rack
5.42 5.45
5.15 5.17
17571 17643
4428 4446
Dual Module
(6 racks)
142 / 3610
45 / 1145
79 / 2006
7500 / 3402
8560 / 3883
Full Array
(DKC-0 plus
DKC-1 plus DKU
x4)
33.1
31.4
107155
27002