Five Rack Configuration - HP HPE XP P9500 Manual

Five rack configuration

This following figure and table shows the service clearances and floor load rating for a five-rack
configuration.
Figure 14 Service clearances for a five rack system
*1 Clearance (a+b) is based on the floor load rating and the clearance (c). Floor load rating and
required clearances are shown in
*2 Clearance (d) is required over 300mm to open the front door. In the case that the clearance
(d) is less tan the clearance (a), give priority to clearance (a).
42 Installation requirements
Table 23 (page 43).