Installation Guide Contents Section 1: Pre-Installing the Windows Vista , XP, and 2000 ® ™ Section 2: Insert the DGE-660TD into your Laptop Section 3: Finishing the Windows Installation ® Package Contents Verify that your D-Link DGE-660TD package contains the following items.
Installing the Driver • With your computer ON, insert the Driver CD of the DGE-660TD into your CD-ROM Drive. • The Autorun Screen will appear as shown here. • Select “Install Drivers” to install the drivers onto your computer. • After a few moments, the “Install Finish” screen will appear.
• Insert the DGE-660TD into the Cardbus slot of your laptop. • Gently insert the front end of the DGE-660TD into the Cardbus slot on your laptop until it is firmly seated. Make sure that the card is face-up, as shown.
Finishing the Installation To complete the installation of the DGE-660TD: • Make sure that the DGE-660TD CD-ROM is inserted in the CD-ROM drive • The DGE-660TD is inserted into your laptop • The laptop is turned ON • See the section below that corresponds to your...
Windows XP Users ® Windows XP completes the installation of the DGE-660TD ® automatically. A “Found New Hardware” message will appear in the task bar to indicate that the installation is complete. Windows 2000 Users ® Windows 2000 completes the installation of the DGE-660TD ®...
: Click on System and Maintenance and then Windows Vista ™ click on Device Manager. Step 3: Scroll down and click the plus (+) sign next to Network Adapters. The D-Link DGE-660TD Gigabit CardBus PC Card will be listed. D-Link DGE-660TD Installation Guide...
Configure your Adapter After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e router) automatically. To verify your IP address, please see follow the steps below: 2000/XP: Click on Start >...
Page 9
Internet > Network and Sharing Center > Manage network connections. Step 2 Right-click on Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
Page 10
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DGE-660TD Installation Guide...
Technical Support You can find software updates and user documentation on the D-Link website. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: (877) 453-5465 http://support.dlink.com...