Table of Contents
Advertisement
Step 6a. ACTION / Navigation
Button
GETTING
STARTED
Press the ACTION button to select main menu items.
Press the • or • arrows to
highlight sub menus.
Press the • arrow to select features. Press the • or • arrows
to scroll through options within a feature.
Press the •
arrow to return to main menu
items.
Remote
ACTION
/
Navigation
Button
Note:
Be careful to press ACTION in the middle of the button.
If you do not press in the
middle of the button, the arrow buttons may be activated.
Step 7. Antenna/Cable
Mode
Select either Antenna
or Cable mode,
depending
on the type of incoming signal you
are using. Cable must be 8VSB format.
Procedure
[3
In SET UP Menu, select INPUT to choose either ANTENNA or Cable.
{3
Press the • arrow, then the • and • arrows to select ANTENNA, Cable STD, Cable HRC
or Cable IRC.
ANTENNA - VHF/UHF
Cable STD - StandardCable TV Signals
Cable HRC - Harmonic Related Carrier
Cable IRC - IncrementalRelatedCarrier
Note:
Contact your local cable provider ff you are not sure which setting to use.
£1
Press the ACTION button to make your selection.
{3
Press the •
arrow to exit back to Roller Guide.
Note:
Whenever the antenna or cable mode is changed, Timer 1and Timer 2 will revert back
to default settings.
SOURCE
ANTENNA
CH MAP
ON
[]
Advertisement
Table of Contents
