2.2 Programming
Parameter & Description
*
Inter-Digit Time (s) 1-10s
Specifies the length of time (in seconds) within which
subsequent digits of a dial number must be dialed.
Generally, there is no need to change the default value.
Digit End Code
*
Specifies the delimiter code to be used to signal the end of a
dial number.
Generally, there is no need to change the default value.
Others
Parameter & Description
Network CODEC of IP-PBX
The value of this parameter is set automatically as
appropriate to the setting of the PBX.
There is no need to change the value.
26
Programming Guide
Default
Value Range
5
1 to 10
#
0 to 9, #, *
Default
Value Range
Not applicable
G.711 Mu-Law,
G.711 A-Law