Control Panel; Display Window - Panasonic NU-HX100S Owner's Manual

3
2
5
8
9
NOTE:
1. If no operation is selected, after the cooking program is set, after 6 minutes the oven will automatically cancel the cooking
program.
2. If the last operation has completed with the oven door closed, after about 6 minutes, the oven will enter stand-by mode. When in
stand-by mode, nothing appears in the display window.
3. When in stand-by mode, it is necessary to open the oven door before operating the oven.
To help you operate the oven conveniently, the present state will appear in the display window.
Number/Character
(Time/Menu/Weight/Temperature)
Bake Display
Temperature Unit Display
(°F / °C)
Cooking Mode Display
Keep Warm Display

Control Panel

1
2
3
4
1
5
6
7
8
4
9
10
6
7
10
11
11
Beep Sound:
When a pad is pressed correctly, a beep will be heard. If a pad is
pressed and no beep is heard, the unit did not or cannot accept
the instruction. At the end of any complete program, the oven will
NU-HX100S
beep 5 times.

Display Window

More/Less Display
10
Display Window (See page 10)
Grill Pad (See page 15-16)
Broil Pad (See page 17)
Combo Pad (See page 18-19)
Auto Cook Pad (See page 22-25)
Bake Pad (See page 20)
Setup Pad (See page 12-13)
More/Less Pad (See page 22)
Timer Pad (See page 21)
Stop/Reset Pad
Before cooking: One press clears all your instructions.
During cooking: One press temporarily stops the cooking
process. Another press cancels all your instructions, and a "0"
will appear in the display window.
Start/Select Dial
Rotate Start/Select Dial to select the power level,
temperature, weight, time and auto cook.
After cooking program setting, press the Start/Select Dial to
begin operation. If the oven door is opened or Stop/Reset
Pad is pressed once during cooking, Start/Select Dial must
be pressed again to restart cooking.
The light on the control panel will prompt you to press or
rotate Start/Select Dial.
Weight Unit Display
(lb/kg)
Time Unit Display
(Minute/Second)
Auto Cook Display
Preheat Display