Additional Safety Instructions F Orplaners - Black & Decker 7696 Instruction Manual

41}
@
0
@I
@"
@
@
~~:=:
Stringy s urface Culler b lade
Surface R landreuse
I
(
Fer
~.m;._~\---
..
~m"
:7~0%
Q)
+
Repeated cut Culler blade
Coupe R epetee
t
<
Fer
Corte repetido Cuchillo
i
Round e dges
I
.
Bords A rrondis
I Bordes r edondos
. ,- - - -
I
- - - -
~~
~;:://
Firstplonedsurfoce
Premieresurfocerobotee
Superficiequesecepilloprimero
4J)
Flanges
Brides
Cejas
Li.
ADDITIONAL SAFETY INSTRUCTIONS F ORPLANERS
-Read
instruction manual thoroughly before using this tool.
-Be sure the switch is in OFF position before connecting tool to power supply.
-Switch OFF immediately if tool is jammed in work.
-Disconnected from power source when cleaning or making adjustments to the tool.
-Be sure tool is properly held or set for right use before turning switch to ON.
-Maintain tool with core. Follow instructions for lubricating and changing accessories.
-Store tool in a clean dry place after disconnecting from power source.
-Keep air vents unobstructed for proper motor cooling.
-00 NOT loy tool down on shoe when the blades are exposed. This can chip the blades.
-Keep side discharge chute unobstructed at all times.
-Never reachunderthe tool for any reasonunlessit is turnedoff and UNPLUGGED.
BlADES
AREEXPOSED
AND EXTREMELY SHARP.
-
Use this tool for working with wood and wood products only.
-Never operate without securely holding the front handle.
-
Always operate planer with two hands.
-Planer blades are extremely sharp
-
Handle with great core.