Step 1 Connection; Component Video Output - Panasonic DMR-E85H Operating Instructions Manual

Table of Contents

Advertisement

1
STEP
Connection
Connecting a television with AUDIO/VIDEO, S-VIDEO or COMPONENT VIDEO
terminals and VCR
Connecting to the television using the 21-pin Scart leads (➡ page 7)
indicates included accessories.
indicates accessories not included.
are required connections. Connect in the numbered order.
1
4
To household mains socket
(AC 220–240 V, 50 Hz)
AC mains lead
Connect only after all other
connections are complete.
4
AC IN
This unit's rear panel
Cooling fan

∫ Component video output

Component signal outputs the colour difference signals (P
reproducing colours. If the television is compatible with progressive output, a high quality picture can be output because this unit's component
video output terminal outputs a progressive output signal (➡page 48).
For progressive output (➡page 14)
RQT7458
8
AUDIO IN
VIDEO IN
R
L
Television's
Red White Yellow
rear panel
Audio/Video cable
3
Red White Yellow
R - AUDIO - L
VIDEO S-VIDEO
OPTICAL
DIGITAL AUDIO OUT
R - AUDIO - L
VIDEO
(PCM/BITSTREAM)
Red White Yellow
Audio/Video cable
Red White Yellow
R
L
VCR's rear panel
AUDIO OUT VIDEO OUT
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
When making this connection, ensure you
connect the audio cables to the corresponding
audio input terminals on the television.
S-VIDEO IN
COMPONENT
VIDEO IN
S-Video
cable
S-VIDEO
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more
vivid picture than the VIDEO OUT terminal.
(Actual results depend on the television.)
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or
progressive output and provide a purer picture than the
S-VIDEO OUT terminal (➡ below).
≥Connect to terminals of the same colour.
You can also connect with the AV2 terminal
on this unit using the 21-pin Scart lead.
/P
) and luminance signal (Y) separately in order to achieve high fidelity in
B
R
VHF/UHF
RF IN
RF coaxial lead
2
Video cable
Y
RF IN
P
B
AV1 (TV)
P
R
AV2 (DECODER/EXT)
COMPONENT
RF OUT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
Use a splitter if
you also want
to connect the
aerial to your
VCR.
VHF/UHF
RF IN
To the aerial
Splitter
Aerial
lead
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents