Makita 6935FD Instruction Manual page 6

Hook
The hook is convenient for temporarily hanging the tool.
This can be removed without using a tool. This can be
installed on either side of the tool.
Installing and removing hook
A) Removal
Remove the battery cartridge from the tool.
Place the tool in a stable and level surface.
Expand an far end of the hook outward and slide it down
while expanding.
Expand the other far end in the same manner.
005941
005942
005943
Keeping the hook in this position, rotate down to the
angle 90° and remove it by pulling in the direction of
arrow as shown in the figure.
B) Installation
Remove the battery cartridge from the tool.
Place the tool in a stable and level surface.
Hold both hooking ends in the upper position and expand
the upper part of the hook.
1
6
007335
005944
005945
005946
1. Hooking ends