1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. 6935FD
  6. Instruction manual

Makita 6935FD Instruction Manual

Cordless impact driver
Hide thumbs Also See for 6935FD:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Impact Driver
6935FD
005940
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 6935FD

Summary of Contents for Makita 6935FD

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver 6935FD 005940 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    EC Declaration of Conformity plastic. ENG102-2 Makita Corporation responsible For European countries only manufacturer declare that the following Makita Noise machine(s): The typical A-weighted noise level determined according Designation of Machine: to EN60745: Cordless Impact Driver Sound pressure level (L ) : 93 dB(A) Model No./ Type: 6935FD...
  • Page 3 000230 Tomoyasu Kato interrupter (GFCI) protected supply. Use of an Director GFCI reduces the risk of electric shock. Makita Corporation Personal safety 3-11-8, Sumiyoshi-cho, 10. Stay alert, watch what you are doing and use Anjo, Aichi, JAPAN common sense when operating a power tool.

  • Page 4: Specific Safety Rules

    GEB012-3 19. Disconnect the plug from the power source and/or the battery pack from the power tool SPECIFIC SAFETY RULES before making any adjustments, changing DO NOT let comfort or familiarity with product accessories, or storing power tools. Such (gained from repeated use) replace strict adherence preventive safety measures reduce the risk of to impact driver safety rules.

  • Page 5: Functional Description

    FUNCTIONAL DESCRIPTION nails, coins, etc. Do not expose battery cartridge to water or rain. CAUTION: A battery short can cause a large current Always be sure that the tool is switched off and the • flow, overheating, possible burns and battery cartridge is removed before adjusting or even a breakdown.
  • Page 6 (1). B=14mm This tool has a reversing switch to change the direction (Note) Makita bits are these types. of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for...
  • Page 7 Expand an far end of the hook outward and slide it down 1. Bit while expanding. 2. Sleeve 001267 To install the bit, pull the sleeve in the direction of 005942 the arrow and insert the bit-piece and bit into the sleeve as far as it will go.
  • Page 8 005944 005948 Keeping the hook in this position, rotate it upwards to the angle 90°and push both ends fully in the direction of arrow as shown in the figure. 005945 B) Installation Remove the battery cartridge from the tool. 005949 Place the tool in a stable and level surface.

  • Page 9: Operation

    Hold the tool firmly and place the point of the driver bit in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. NOTE: Use the proper bit for the head of the screw/bolt •...
  • Page 10 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Screw bits • Various type of Makita genuine batteries and • chargers Plastic carrying case •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 884524F228...

Table of Contents