Replacing The Headlight Bulbs (Fz8Sa) - Yamaha FZ8NA Service Manual

Hide thumbs Also See for FZ8NA:
Table of Contents

Advertisement

12. Install:
• Headlight bolts
Headlight bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
13. Install:
• Headlight side covers
• Headlight side cover bolts
Headlight side cover bolt
3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
14. Install:
• Headlight side panels
• Headlight side panel bolts
Headlight side panel bolt
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
15. Install:
• Headlight top cover
• Headlight top cover bolts
Headlight top cover bolt
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
EAS39P1305
REPLACING THE HEADLIGHT BULBS
(FZ8SA)
The following procedure applies to both of the
headlight bulbs.
1. Remove:
• Inner panel
Refer to "GENERAL CHASSIS" on page
4-1.
2. Disconnect:
• Headlight coupler "1"
PERIODIC MAINTENANCE
3. Remove:
• Headlight bulb cover "1"
4. Remove:
• Headlight bulb holder "1"
5. Remove:
• Headlight bulb
EWA13320
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb until it has
cooled down.
6. Install:
• Headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
3-32
New

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz8sa

Table of Contents