Honda 1996 Prelude Owner's Manual page 164

4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
lens. Turn it clockwise to lock it in
place.
6. Turn on the parking lights to
make sure the new bulb works.
7. To reinstall the light assembly in
the fender, line up the fingers on
the light assembly with the holes
in the fender. Push the light
assembly straight back.
8. Install the mounting screw and
tighten it securely.
Replacing a Front Side Marker
Light Bulb
SCREW
1. Use a Phillips-head screwdriver to
loosen the side marker assembly's
mounting screw.
2. Remove the side marker assembly
from the bumper.
FRONT SIDE
MARKER
ASSEMBLY BULB HOLDER
3. Remove the bulb holder from the
side marker assembly by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Maintenance
Lights
BULB
CONTINUED