Honda 2007 Civic Hatchback Owner's Manual page 56

In addition, the lap/shoulder belts in
the back seating positions have a
lockable retractor that must be
activated to secure a child restraint
system.
The seat belt with a lockable
retractor has a label as shown in the
illustration above.
To properly route a lap/shoulder belt
through a child restraint system,
follow the restraint system maker's
instructions.
For EU countries, refer to page
47 for installing a child restraint
system.
LABEL
SEAT BELT
Installing a Child Restraint System
The procedures in the following
pages are described based on a front
facing child restraint system
available in EU countries.
1. Place the child restraint system in
the desired back seating position.
Make sure the child restraint is
positioned well back in the seat-
back.
If you place the child restraint
system in either rear outer seating
position and use the tether strap for
additional security, make sure to
push down the head restraint to the
lowest position and attach the
attaching clip to the anchor fitting
before securing the child restraint
system with the lap/shoulder belt.
Driver and Passenger Safety
CONTINUED
53