Honda 2007 Civic Hatchback Owner's Manual page 393

Lights
BULB
CONNECTOR
3. Remove the electrical connector
from the bulb by pulling the
connector straight back.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
390
Maintenance
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Reinstall the cover over the back
7.
of the headlight assembly and turn
it clockwise to lock in place. Make
sure it is right side up; it is marked
''TOP.''
8. Turn on the headlights to test the
new bulb.
9. Reinstall the secondary air intake
duct securely, then put the cover
back in place. Reinstall the two
fasteners and secure them by
pushing on the heads until they
lock, and put the cable back in
place.
High Beam Headlights
(Diesel models)
1. Open the bonnet.
To change a bulb on the left side,
remove the nut on the battery stay,
then push the battery toward the
windscreen to obtain enough
working space.