Honda 1990 Accord Sedan Owner's Manual page 55

Stereo Sound System (cont'd)
Repeat Button (REPEAT)
Push the REPEAT button (indicator on) to return to the begin-
ning of a song or section of programming and repeat its play.
Push the button again (indicator off) to cancel the repeat func-
tion and resume normal play.
Dolby® Noise Reduction (
Push when playing tapes recorded in Dolby NR (the Dolby NR
Indicator will light). Push again when playing tapes not record-
ed in Dolby NR. Use of the wrong setting will affect high fre-
quency response.
NOTE:
The Dolby NR circuit will not operate during radio reception.
Dolby noise reduction system is manufactured under license
from Dolby Laboratories Licensing Corporation. "Dolby"
and the double-D
Laboratories Licensing Corporation.
Skip Button
The circuit senses silent passages between songs or programs
on a tape. Push upward to automatically advance to the begin-
ning of the next song, or downward to return to the beginning
of the song just played.
NOTE: Tapes that contain short silent passages between
songs, a high level of noise between songs, or silent passages
within a song may not be suitable for this function.
Metal Indicator (METAL)
Most metal or CrO
back edge. If such a cassette is inserted, the player will detect
the slots and automatically switch to the proper equalization
for full enjoyment of metal/CrO
go on when coded cassettes are played.
Eject (EJECT)
Push this button to stop and eject the tape.
Ignition Key-OFF Eject: The cassette being played will be
automatically ejected when the ignition or the unit is turned
off.
NOTE: When one side of the tape ends, "Auto-Reverse" will
automatically begin playing the other side, therefore, you must
push the eject button to stop or remove the tape.
)
symbol are trademarks
cassettes are coded with slots on their
2
tapes. The indicator light will
2
of Dolby