Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha 2011 WR250RA Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1 by removing the screw.
2
3
4
5
1. Screw
6
2. Turn signal light lens
2. Remove the burnt-out bulb by
7
pushing it in and turning it counter-
clockwise.
8
9
EAU24204
1. Turn signal light bulb
2
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
1
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
light bulb
1
1. Screw
[ECA11191]
7-36
1. Remove the license plate light unit
by removing the screws.
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
EAU24313
1