Indicator Lights And Warning Lights - Yamaha 2011 WR250RA Owner's Manual

To unlock the steering
1 2
1. Push.
2. Turn.
Push the key in, and then turn it to
"OFF" while still pushing it.
INSTRUMENT AND CONTROL FUNCTIONS
Indicator lights and warning
lights
2
1
6 5
1. Coolant temperature warning light "
2. Fuel level warning light " "
3. Neutral indicator light " "
4. Turn signal indicator light "
5. High beam indicator light "
6. Engine trouble warning light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
4-2
EAU49391 transmission is in the neutral position.
High beam indicator light "
3 4
This indicator light comes on when the
high beam of the headlight is switched
on.
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
2.1 L (0.55 US gal, 0.46 Imp.gal). When
this occurs, refuel as soon as possible.
"
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
"
on for a few seconds, and then go off.
"
If the warning light does not come on
"
initially when the key is turned to "ON",
or if the warning light remains on, have
EAU11020
a Yamaha dealer check the electrical
"
circuit.
Coolant temperature warning light
" "
EAU11060
This warning light comes on if the en-
"
gine overheats. If this occurs, stop the
EAU11080
"
2
EAU11352
3
4
5
6
7
8
9
EAU11444