Table of Contents
Advertisement
Daytime Running Lights, Instrument Panel Brightness, Hazard Warning
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
72
Instrument Panel Brightness
INSTRUMENT PANEL BRIGHTNESS
KNOB
The knob on the instrument panel
controls the brightness of the instru-
ment panel lights. Turn the knob to
adjust the brightness.
Hazard Warning
Push the button between the center
vents to turn on the hazard warning
lights (four-way flashers). This
causes all four outside turn signals
and both turn indicators in the
instrument panel to flash. Use the
hazard warning lights if you need to
park in a dangerous area near heavy
traffic, or if your vehicle is disabled.
Advertisement
Table of Contents
