Honda 1996 Accord Coupe Owner's Manual page 171

Lights
Replacing Rear Bulbs
(in Fenders)
KNOB
1. Open the trunk and remove the
taillight cover by turning the knob.
2. Determine which of the two bulbs
is burned out: tail/stoplight or turn
signal.
Maintenance
COVER
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Remove the burned out bulb from
the socket by pulling it straight out
of its socket
5. Install the new bulb in the socket.
6. Reinstall the socket into the light
assembly.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the taillight assembly
cover.