Table of Contents
Advertisement
Top view
Projection surface
10 m
(33 ft)
10 m
(33 ft)
Side view
Projection
surface
Projector
18
Using the Picture Position
10 m
(33 ft)
Projector
10 m
(33 ft)
10 m
(33 ft)
Using the Picture
Position
You can recall the stored lens settings (lens
zoom, lens focus, lens corner correction) and
aspect ratio.
Use this function for changing projection
image size of multiple pictures, etc.
1
Select "Custom 1", "Custom 2", or
"Custom 3" in
Picture Position" of
"
the Screen
menu.
The picture position that you selected is
recalled.
Tip
Store or delete the lens settings in the "Picture
Position" of the Screen
I
Notes
• If you press any button on the remote control
or the unit while the lens is moving, the lens
stops. In this case, select the lens position
again or adjust the lens manually.
• The Picture Position function is not
guaranteed to reproduce the lens settings
precisely.
• When you use the subtended angle of two or
more aspects using lens zoom, install the unit
within the specified parameters referring to
"Installation Distance and Projection Image
Size" (page 57).
menu (page 30).
Advertisement
Table of Contents
