GE CV966 Owner's Manual And Installation Instructions page 11

TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Phillips and
Flat blade
Pencil and tape
screwdrivers
measure
Electric drill with 1/8" and
3/8" bits
Spirit level
Flashlight
Pliers
Hammer
Wire Cutter/
Stripper
Ladder
Additional Materials:
• 120V 60Hz, 15 or 20 Amp, 2 wire with ground.
Properly grounded branch circuit.
•
duct length to suit installation.
49-80520-7
Installation Instructions
Duct tape
socket
Safety glasses
UL Listed Wire nuts
Tin Snips
Saber saw or Key Hole Saw
Allen Wrench
REMOVE THE PACKAGING
Wood
Mounting
Motor
Support
Shipping Carton
• Remove shipping screws holding the wood mounting
piece to the back side of the hood. Set aside wood
mounting piece and screws for later installation. Do
not discard.
• Remove the "V" shaped carton insert.
• Remove parts package from the "V" shaped
cardboard insert.
• Install strain relief onto back or top of hood.
• Remove all tape and packing material from the hood,
duct transition and motor.
Hood
Parts
Package
11