Panasonic TH-42PZ800U Service Manual page 22

7.18. Remove
Board and GH-Board
1. Remove the Front bracket. (See section 7.17.)
2. Remove the screws (×5
3. Remove the screws (×4
4. Remove the Front shield case front and the Front shield
top.
5. Remove the GH-Board.
6. Remove the screws (×2
7. Remove the screws (×3
8. Disconnect the connector (G51) and remove the G-
Board.
7.19. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
the G-Board,
).
).
) and remove the GS-Board.
).
GS-
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×4
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
22
, ×6
).