Remove The Sc-Board; Remove The Stand Brackets; Remove The D-Board; Remove The Ss-Board - Panasonic TH-42PZ800U Service Manual

7.11. Remove the SC-Board

1. Remove the SU-Board and SD-Board. (See section 7.9.
and 7.10.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×8

7.12. Remove the SS-Board

1. Remove the Speaker box (Woofer/L). (See section 7.8.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11, SS12, SS33 and
SS35).
4. Remove a short-jumper connector SS34 and re-use for
new SS-Board.
5. Disconnect the flexible cables (SS61, SS63, SS64 and
SS66).
6. Remove the screws (×6
) and remove the SC-Board.
) and remove the SS-Board.

7.13. Remove the Stand brackets

1. Remove the Plasma panel section from the servicing
stand and lay on a fiat surface such as a table (covered)
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws (×4
each) and remove the Stand brackets (L, R).

7.14. Remove the D-Board

1. Remove the A-Board unit. (See section 7.6.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (×4
20
) and remove the D-Board.