Automatic Anti-Calc System; Electronic Safety Shut-Off Function; Alert Light And Electronic Safety Shut-Off Function - Philips GC4340 Instructions Manual

ENGLISH
8

Automatic anti-calc system

C
1 The built-in anti-calc system reduces the build-up of scale and
guarantees a longer life for the iron.

Electronic safety shut-off function

Type GC4320 only.
B
C
◗ The electronic safety shut-off function automatically switches off
the iron if it has not been moved for a while.
◗ The red auto-off pilot light starts blinking to indicate that the iron
has been switched off by the safety shut-off function.
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light goes out. If the temperature of the
soleplate has dropped below the set ironing temperature, the amber
temperature pilot light goes on.
- If the amber pilot light goes on after you have moved the iron, wait
for it to go out before you start ironing.
- If the amber pilot light does not go on after you move the iron, the
soleplate still has the right temperature and the iron is ready for use.

Alert light and electronic safety shut-off function

Types GC4340 and GC4330.
B
The iron is equipped with a blue alert light.
C
◗ The blue alert light burns as long as the iron is plugged in.
◗ The blue alert light starts blinking to indicate that the iron has
been switched off by the safety shut-off function.
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The blue alert light stops blinking. If the temperature of the soleplate
has dropped below the set ironing temperature, the amber
temperature pilot light goes on.
- If the amber pilot light goes on after you have moved the iron, wait
for it to go out before you start ironing.
- If the amber pilot light does not go on after you move the iron, the
soleplate still has the right temperature and the iron is ready for use.