After The Calc-Clean Process; Storage; Heat-Resistant Protective Cover; Environment - Philips GC4340 Instructions Manual

ENGLISH
10
1
2

After the calc-clean process

- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.

Storage

1 Make sure the appliance is unplugged and set the steam control
to position O.
C
2 Empty the water tank.
C
3 Let the iron cool down. Wind the mains cord around the cord
storage facility and fix it with the cord clip.
4 Always store the emptied iron horizontally on a stable surface
and use a cloth to protect the soleplate.

Heat-resistant protective cover

Type GC4340 only.
B
Do not use the heat-resistant protective cover during ironing.
C
1 Put the iron on the heat-resistant protective cover.
2 Wind the mains cord around the cord storage facility.
3 Store the iron with the heat-resistant protective cover
horizontally on a stable surface.

Environment

C
◗ Do not throw the appliance away with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this you will help to preserve the
environment.