Time-Lapse Shot Number; Steadyshot (Movie) - Sony FDR-X3000 Read This First Manual

[36] Changing the Settings

Time-lapse shot number

You can set the number of still images shot during time-lapse capture.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
setting) -
REC/ENTER button.
(Shoots 300 still images)
(Shoots 600 still images)
(Shoots 900 still images)
(Continue to shoot still images until you stop shooting)
Hint
The maximum number of continuous shots is 40,000.
[37] Changing the Settings

SteadyShot (Movie)

You can activate the camera-shake reduction when shooting movies. This function is available in
Movie mode, Live streaming mode, and Loop recording mode.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(FDR-X3000/HDR-AS300)/
value, then press the REC/ENTER button.
FDR-X3000/HDR-AS300
(Uses all-encompassing SteadyShot function when shooting movies)
(Uses SteadyShot function when shooting movies)
(Does not use SteadyShot function when shooting movies)
Shooting settings
(Time-lapse shot number) - setting value, then press the
Shooting settings
(Time-lapse capture mode
/ /
(HDR-AS50) (SteadyShot (Movie)) - setting
(Shooting settings) -