Table of Contents
Advertisement
Sending Documents via Telephone Line
Voice Mode Transmission
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
1
2
3
4
NOTE
116
Set document(s) face down.
You will hear dial tone through the monitor speaker.
Dial the telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
When you hear a beep,
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
(represented by a "/").
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE * 5551234
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
❚
* DIALLING *
5551234❚
ON LINE * XMT *
PAUSE
to
Advertisement
Table of Contents
