Page 1
DWL-120 11 Mbps Wireless USB Adapter Installing the Drivers Installing the Drivers Note: Please do not connect the DWL-120 wireless USB adapter until advised to do so. With the computer turned ON, insert the driver CD for the DWL-120 Wireless USB adapter into the CD-ROM.
Click Next, on the following screen. When the following screen is displayed, Click Next. Windows will finish loading system files. Finishing Installation Finishing Installation Insert the DWL-120 Wireless USB adapter into an available USB port. Windows will recognize the new hardware. Rev:dwl-120.01-22-01.10am...
Page 3
Click Next. The driver files will be found on the CD, as shown in the following screen. Note: If Windows is unable to find the drivers, refer to Appendix A for browsing the CD-ROM drive. Click Next. Rev:dwl-120.01-22-01.10am...
Page 4
Finishing Installation Finishing Installation continued continued The following screen will appear only during the initial installation. Click Yes to continue. At the next window, Click Finish. Restart the computer to complete the installation. To check that the adapter is working, click on the configura- tion utility icon in the task bar.
Page 5
For instructions on configuration, please see your User’s Manual. APPENDIX APPENDIX Providing Driver Files Providing Driver Files If prompted for the driver files, insert the driver CD. Click Browse. Select the CD-ROM drive. Click OK. Windows will copy the necessary files.