Display; Connection - Panasonic DMR-ES20DEB Operating Instructions Manual

FUNCTIONS Selection Menu
To Others
SETUP
DVB Preferred Subtitles
English
On-Screen Messages
Automatic
Grey Background
On
Tuning
FL Display
Bright
Disc
New Service Message
Automatic
Picture
Sound

Display

Connection

SELECT
TAB
Others
RETURN
New Service
A new DVB service has been found.
Add to the list of "All Services"?
Yes
No
SETUP
TV Aspect
16:9
Progressive
Off
TV System
PAL
Tuning
AV1 Output
RGB
Disc
AV2 Settings
Picture
Sound
Display
SELECT
Connection
TAB
Others
RETURN
SETUP
TV Aspect
16:9
Progressive
Off
TV System
PAL
Tuning
AV1 Output
RGB
Disc
AV2 Settings
Picture
Sound
Display
Connection
SELECT
TAB
Others
RETURN
SETUP
AV2 Settings
AV2 Input
RGB/Video
Ext Link
Ext Link 1
Tuning
AV2 Input
Disc
RGB / Video
Picture
RGB
Sound
Video
Display
S Video
Connection
Others
SELECT
ENTER
RETURN
46
SETUP
Display Settings
DVB Preferred Subtitles
DVB only
Select the language for DVB Subtitles.
On-Screen Messages
Automatic: The screen messages are displayed on the screen.
Grey Background
On: The grey background is displayed when there is no television reception.
FL Display
Change the brightness of the unit display.
New Service Message
DVB only
Automatic: New digital stations are constantly scanned in the background. A message is displayed if new stations
were found and you can add them to you station list.
Connection Settings
TV Aspect
Select the TV picture format of your television set.
Letterbox: Black bar appear at the top and bottom of your screen.
Progressive
On: In COMPONENT VIDEO OUT mode, the signal is displayed in full picture quality.
TV System
PAL: You connect the unit to a PAL or multi-system television set.
Programmes that were recorded with NTSC are played back as PAL60.
NTSC: You connect the unit to an NTSC television set.
Programmes that were recorded with NTSC are played back as NTSC.
AV1 Output
Switch to RGB for an improved picture quality.
If RGB is set, no signal is available at COMPONENT VIDEO OUT.
AV2 Settings
Perform the settings in the following sub menus for the connected device.
AV2 Input
RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.
Ext Link
Ext Link 1: For digital receivers that send a special recording control signal, e.g. the F.U.N. receiver (TU-DSF41).
Ext Link 2: External recording control for satellites or digital receivers (video signal).
ENTER Option
[Automatic] [Off]
[On] [Off]
[Bright] [Dim]
[Automatic] [Off]
ENTER
Option
[16:9] [4:3] [Letterbox]
[On] [Off]
Only COMPONENT VIDEO OUT.
[PAL] [NTSC]
[Video ( with component )] [S Video (with component)]
[RGB ( without component )]
AV2 Input, Ext Link
[RGB / Video] [RGB] [Video] [S Video]
[Ext Link 1] [Ext Link 2]
ENTER
ENTER