Feature Reference
Hall1, Hall2, Room1, Room2, Studio, Plate, Space, Reverse
Use the ¡ (">") and ™ ("<") buttons to switch between the two pages
•
of effect parameters.
Return
≤
0 ... 100 %.
Determines how much of the reverb sound is mixed with the direct sound. Higher
values produce higher reverb sound levels.
Reverb Time
≤
0.05 ... 100.0 sec.
Sets the amount of time it takes for the reverb sound to decay by 60 dB (virtually to
silence).
Reverb Time Boost
≤
0 ... 10.
This parameter ca be used to extend the tail end of the reverb sound. The higher the
value the greater the "boost".
Edit Mode
Boost
Reverb
Time
61