Feature Reference
Use the ¡ (">") and ™ ("<") buttons to switch between the two pages
•
of effect parameters.
Element on/off — E1: & E2:
≤
off, on.
In this parameter the cursor can be positioned at "E1:" or "E2:" to individually turn
the flanger effect on or off for elements 1 and 2, respectively. When "on" the output of
the corresponding element is fed to the input of the modulation stage, and when "off"
the modulation stage is bypassed. The "E2:" parameter will not appear when editing a
single-element voice.
Wave
≤
Triangle, Sine, Random.
Selects the waveform which will be used to modulate the flanger effect.
Triangle
Sine
Random
Freq.
≤
0.057 ... 40.0 Hz when Triangle or Sine Wave selected,
≤
0.229 ... 160.0 Hz when Random Wave selected.
Sets the speed of modulation and therefore the rate of flanger effect variation.
Depth
≤
0 ... 100 %.
Sets the depth of modulation. Higher values produce deeper modulation and there-
fore a more pronounced flanger effect.
Edit Mode
Flanger
47