Yamaha ATS-1030 Quick Start Manual

ATS-1030 Quick Start Guide
Supplied items
Before assembling and connecting, make sure you have received all of the following items.
If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.
Sound bar (ATS-1030)
Remote control Two AAA batteries
(Install the batteries in
the remote control.)
Placement
© 2013 Yamaha Corporation
Optical cable
1.5 m (4.9 ft)
Mounting template
(Use when attaching the sound bar to a wall.)
RCA stereo cable Spacer × 2
1.5 m (4.9 ft) (Use when attaching the
sound bar to a wall.)
Place the sound bar in front of or below your TV, either with or
without a stand, at least 2'' away from your TV.
The sound bar may also be mounted on a wall, using the
included mounting template and commercially available
screws. Refer to the Owner's Manual for additional mounting
instructions.
NOTE
• Be careful not to stack this unit with any other components, as vibration
may cause system disruption in other components.
Owner's Manual
Continued to the reverse side
Printed in Malaysia ZK08370