Panasonic SH-WL30 Operating Instructions Manual page 21

WPS
This page allows you to change the setting for WPS (Wi-Fi Protected
Setup).
Using this feature could let your wireless client automically syncronize its
setting and connect to the access point in a minute without any hassle.
When the settings are complete, click "Start".
≥ The settings will be applied after you click "OK" and wait for a while.
Item
PIN code of this device
PBC method connection
PIN code of client
Description
PIN code of access point created
while manufacturing
The Start button provides tool to scan
the wireless network. If any access
point or independent basic service set
is found, you could connect it
automatically when client join PBC
mode.
Input the Client PIN Number from
your Client sites.
- 21 -