Table of Contents
Advertisement
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recom-
mended in this user’s guide to maximize the life of your unit.
Warning- Do not look into the projector’s lens when the lamp is
Warning- To reduce the risk of fire or electric shock, do not
Warning- Please do not open or disassemble the product as this
Warning- When changing the lamp, please allow unit to cool
Warning- This product will detect the life of the lamp itself.
Warning-
Warning- When switching the projector off, please ensure the
Warning- Turn on the projector first and then the signal sources.
Warning- When the lamp reaches the end of its life, it will burn
Downloaded from ProjectorsManual.com Manuals
on. The bright light may hurt your eyes.
expose this product to rain or moisture.
may cause electric shock.
down, and follow all changing instructions.
Please be sure to change the lamp when it shows
warning messages.
Reset the “Reset Lamp Hours” function from the On
Screen Display “Management” menu after replacing
the lamp module (refer to page 21
projector completes its cooling cycle before
disconnecting power.
out and may make a loud popping sound. If this
happens, the projector will not turn back on until the
lamp module has been replaced. To replace the
lamp, follow the procedures listed under “Changing
the Lamp”.
).
ViewSonic PJ255D
2
Advertisement
Table of Contents
