Table of Contents
Advertisement
Problem: Image is out of focus
Adjusts the Focus Ring on the projector lens. Refer to page
4
Make sure the projection screen is between the required distance
4
3.94 to 32.81 feet (1.20 to 10.00 meters) from the projector.
Problem: The image is outstretched when displaying 16:9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following: (See page
Please select 4:3 aspect ratio type on your DVD player if you are
4
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please
4
refer to page 18 to choose 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
To select “Management” from the OSD and adjust the projection
4
direction. See page
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
4
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Changing the Lamp”. See
27.
page
Downloaded from ProjectorsManual.com Manuals
22.
12.
17
)
ViewSonic PJ255D
26
Advertisement
Table of Contents
