Advertisement
WCR-GN Firmware Version:
WCR-GN Ver.1.04 (R4.20/B1.13) / WCR-HP-GN Ver.1.00 (R0.06/B1.13)
Router Setting (For: PCCW, HGC PPPoE User)
"Basic
12. Click
(11n/g/b)" Page,
"Wireless
-
Behind
Channel",
Choose 1, 6, 11, or another channel
the "Use" at "SSID2".
-
Please
uncheck
"Apply"
-
Then click
button twice to save the settings.
13. Wait about 1 minute
You can check the Router's default wireless network ID (SSID) at the side of
the router's label.
For related topics about WCR-GN, please refer to Hornington
Knowledge Base:
http://support.hornington.com/kb/category.php?catID=143
Last Updated 28/04/2011
Hornington KB: http://kb.hornington.com
WCR-GN/WCR-HP-GN PPPoE Setting Page 5
"Auto
Please do not use
Channel",
Advertisement
