Adjustments; Before Starting Adjustment - Sony DCR-PC100 Service Manual

1.

Before starting adjustment

EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a board
is replaced.
(Machine before starting repair)
Save the EVR data
to a personal computer.
Procedure 2
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or installed,
save the data from the same model of the same destination, and download it.
(Machine to be repaired)
(The same model of the same destination)
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 5-3 for the items to be checked.)
SECTION 5

ADJUSTMENTS

PC
PC
Save the data.
5-1
DCR-PC100/PC100E
PC (Machine after a board is replaced)
Download the saved
data to a machine.
(Machine to be repaired)
Download the data.