Selection Of Rotary Cutters - Honda Paice Setter PS260S Operator's Manual

6. Checking the spark plug
Re-sharpening the cutter blade
✗
The star blade (4 teeth) and eddy blade (8 teeth) cutting tools
must only be re-sharpened by an authorized facility. Manual
re-sharpening will result in an imbalance of the cutting tool
causing vibration and damage to the equipment.

SELECTION OF ROTARY CUTTERS

DO NOT cut wood and twigs with 3-toothed blade, 4-toothed
blade or 8-toothed blade.
The spark plug may gather carbon deposits on its firing
end with reasonable use. Remove and inspect the spark
plug every 25 hours and clean the electrodes as
necessary with a wire brush. For the correct spark plug
gap, please refer to the engine manufacturer's
recommendations. If the gap is too wide or too narrow,
adjust it. Plug manufacturers recommend replacing the
plug twice a year to avoid unexpected plug failure.
CAUTION
If in doubt, replace blade or consult your local dealer.
Select the blade best suited to the purpose:
Cutter type
2 line nylon cutter
3 blade cutter
4 blade cutter
8 blade cutter
Use only BS 7113 approved blades
WARNING:
to avoid serious injury
If in doubt, consult your local dealer for advice.
Application
soft and low weeds
relatively low weeds
relatively low weeds
relatively hard weeds
19