D-Link DAP-2360 User Manual page 33

Section 3 - Configuration
Network Set the maximum utilization of this access point for service. The DAP-2360 will not allow any new clients to associate with the AP if the
Utilization:
utilization exceeds the value the user specifies. Select a utilization percentage between 100%, 80%, 60%, 40%, 20%, or 0%. When this
network utilization threshold is reached, the device will pause one minute to allow network congestion to dissipate.
Aging out: Use the drop-down menu to select the criteria of disconnecting the wireless clients. Available options are RSSI and Data Rate.
When RSSI is selected in the Aging out drop-down menu, select the percentage of RSSI here. When the RSSI of wireless clients is lower
RSSI Threshold:
than the specified percentage, the device disconnects the wireless clients.
When Data Rate is selected in the Aging out drop-down menu, select the threshold of data rate here. When the data rate of wireless
Data Rate
Threshold: clients is lower than the specified number, the device disconnects the wireless clients.
ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the device denies the connection request from the wireless clients
with the RSSI lower than the specified threshold below.
ACL RSSI Set the ACL RSSI Threshold.
Threshold:
D-Link DAP-2360 User Manual 33