NETGEAR EX7300 Nighthawk X4 AC2200 Quick Start Manual page 19

Enter your email address and password and click the LOG IN
b.
button.
The Status page displays.
5. Select Settings > Connected Devices.
The Connected Devices page displays the MAC addresses and virtual
MAC addresses for the extender, wired devices, and WiFi devices that
are connected to the extender.
6. On the router, add the extender's virtual MAC addresses and all the
virtual MAC addresses of the devices connected to the extender to
your router's MAC filter table.
7. Enable the router's MAC filter, wireless access control, or ACL.
I am connected to NETGEAR_EXT and launched a browser. I can't
see the NETGEAR installation assistant. What can I do?
Try these troubleshooting steps:
• Make sure that your WiFi-enabled computer is set up to use DHCP
(most are).
• Make sure that the Client Link LED is green and that you are using a
valid IP address.
Relaunch the web browser and type www.mywifiext.net in the
•
address field. Type your email and password and click the LOG IN
button.
19