D-Link DCS-6511 Quick Installation Manual page 13

Adjusting the Lens
Adjusting the lens 3-axis Mount
Adjust the Viewing Angle of the
3-axis Mechanism
Turn the lens module left and
right until the desired position is
achieved; tighten the pan screw once
completed.
Loosen the tilt screws on both sides of
the camera, and turn the lens module
up and down until the desired
position is achieved; tighten the tilt
screws once completed.
Turn the lens to adjust the IP camera's
image until the desired orientation
is achieved, tighten the image
adjustment screw once completed.
13 D-Link DCS-6511 Quick Install Guide