Use The Extender With Mac Filtering Or Access Control - NETGEAR EX7300 User Manual

Nighthawk x4 ac2200 wifi range extender
Hide thumbs Also See for EX7300:
Table of Contents

Advertisement

A login window opens.
4.
Enter your user name and password and click the LOG IN button.
The Status page displays.
5.
Select Settings > Wireless Settings.
The WiFi Settings page displays.
6.
Scroll down and click the IP Address heading.
By default, the Dynamically get IP Address From Router radio button is selected.
7.
Select the Use Static IP Address radio button.
8.
Complete the fields to specify the IP network IP addresses.
9.
Click the SAVE button.
Your settings are saved.

Use the Extender With MAC Filtering or Access Control

When the WiFi device connects through the extender to your router, the MAC address of the
WiFi device that is shown on the router is translated to another MAC address. If your router's
MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender
but cannot get an IP address from the extender and cannot access the Internet. To allow the
WiFi device to receive an IP address from the extender and access the Internet, you must
provide the translated MAC address to the router.
To add a translated MAC address to your router:
1.
Log in to your router and disable the MAC filter, WiFi access control, or ACL.
For information about how to disable your router's MAC filter, WiFi access control, or
ACL, see your router's documentation.
2.
Power on the extender and connect all of your WiFi devices to the extender.
3.
Make sure that the Link Rate LED remains lit.
4.
Log in to your extender:
a. Launch a web browser.
Nighthawk X4 AC2200 WiFi Range Extender
Extender Network Settings
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents