Advertisement
R
epair
[1]-3 Terminal Cover
DISASSEMBLING
Unscrew Flange BT3x10 tapping screw and remove Terminal cover (Fig.7).
Fig.7
Remove Tapping screw from inside of Charger case complete and
dismantle Terminal cover as securing two Compression spring 4.
Flange BT3x10 tapping screw
ASSEMBLING
Place two Compression spring 4 into Terminal cover and fix them to Charger case complete by tightening Flange BT3x10
Tapping screw to 0.5 N.m (Fig. 8).
Note: Compression spring 4 (231474-6) in Terminal cover is not interchangeable with Compression spring 4
(233194-8) under Terminal unit.
Fig.8
1. Place two Compression spring 4 into
Terminal cover as described below.
Compression spring 4
Terminal cover
Compression spring 4 (231474-6)
Charger case complete
Boss
2. Fix Terminal cover by inserting its boss
into oval slot on Charger case complete.
Oval slot
Charger case complete
P 4/ 5
Boss
Advertisement
