Get-Function Listing - ViewSonic CD4620 User Manual

Hide thumbs Also See for CD4620:
Table of Contents

Advertisement

6.2 Get-Function Listing

The PC can interrogate the LCD Monitor for specific information. The Get-Function packet format
consists of 5 bytes which is similar to the Set-Function packet structure. Note that the "Value" byte is
always = 00.
Get-Function description:
Length:
Command:
Value[1~3]:
Get-Function format from PC to LCD (ASCII)
Name
Byte Count
Bytes order
Monitor shall response to Get-Function with the following packet format:
LCD Monitor response packet format:
Name
Byte Count
Bytes order
Response packet (to Get-Function):
Length:
Value[1-4]:
LCD Monitor will send "+" (02Bh), "CR" bytes to PC after receiving a valid command
LCD Monitor will send "-" (02Dh), "CR" bytes to PC if the command is not valid
The following is an example of PC requesting the volume value from the LCD Monitor:
PC send Get-Volume-value packet to Monitor (In ASCII)
Name
Byte Count
Bytes order
LCD Monitor will send "-" (02Dh), "CR" to PC if command is not recognized.
Otherwise the LCD Monitor will respond with the volume value as outlined below:
LCD-Monitor response packet to Get-volume-value (in this example the volume value is 50):
Name
Byte Count
Bytes order
A special command "Get-ACK" is used to test the communication link between PC and the LCD Monitor.
The LCD Monitor shall response to "Get-ACK" command with a "+" or "-".
Get-ACK from PC to LCD (ASCII)
Name
Byte Count
Bytes order
LCD Monitor will send "+" (02Bh); "CR" bytes to PC after receiving the command indicating that the
communication link is OK
ViewSonic CD4620
Downloaded From TV-Manual.com Manuals
Total bytes of message = 5 ASCII (35H), excluding "CR"
Get-Function command code: One byte ASCII code
Always = 000
Length
Command
5
1 Byte
1
2
Length
Value1
Value2
5
1 Byte
1 Byte
1
2
3
Total bytes of packet = 5 ASCII excluding "CR"
Exception: Total bytes for On-Hours = 6
Four ASCII codes: Value range is from 0000 ~ 9999
Exception: Value[1-5] for On-Hours
Length
Command
5
f
1
2
Length
Value1
Value2
5
0
0
1
2
3
Length
Command
5
z
1
2
Value1
Value2
Value3
0
0
0
3
4
5
Value3
Value4
1 Byte
1 Byte
4
5
Value1
Value2
Value3
0
0
0
3
4
5
Value3
Value4
5
0
4
5
Value1
Value2
Value3
0
0
0
3
4
5
CR
00D
6
CR
00D
6
CR
00D
6
CR
00D
6
CR
00D
6
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd4220

Table of Contents